This tip lets you build bike and rider (with exhausts) seperately which makes painting both much easier.

Becoming proficient at gluing Warhammer figures requires practice, and it’s important to remember that everyone makes mistakes when starting out. However, with time, you’ll start to get a feel for how the glue works and how much you need to use. Once thoroughly dry the place, you must sand the surface to make it even and smooth. To make a stronger bond between the plastics, sanding is essential. It also helps to hide the joint and make it look like one. So, final sanding is necessary to get a good finish. Step 3: Place the two parts together and press firmly for a few seconds. Make sure the parts are aligned correctly as it will be difficult to reposition them once the glue dries. With your other hand, take a pair of scissors and place the blades above the nozzle of the Citadel Glue tube.

Common Mistakes to Avoid When Using Citadel Glue

To be fair these are optional, depending on how well you get on with some of the upcoming stages. but if you want that perfectly flat surface, sanding them smooth once you have filled the gaps. The best plastic glue, which will (almost always) the best glue for Warhammer, the best glue for Kings of War, the best glue for Conquest, and the best glue for many, many other games, is Tamiya Extra Thin Cement.

Another option is to use a glue accelerator. These products contain chemicals that can speed up the drying process, even in cold conditions. However, you should be cautious when using accelerators, as they can sometimes cause the glue to become brittle or weak.

Frequently Asked Questions

When using sandpaper, it’s important to choose the right grit. A grit of around 120-150 is a good starting point. Sandpaper with too coarse of a grit will scratch the surface too much, and too fine of a grit will not be effective at creating the necessary texture for the glue to adhere. While sandpaper is not always necessary when glueing Warhammer figures, it can be a helpful tool in creating a stronger bond between the parts. Just be sure to use it correctly and choose the right grit for the job. Step-by-Step Guide

To avoid this, dip your paintbrush into a little bit of water and mix it with the glue on your palette. This thins the glue out and makes it easier to work with. You only need a small amount of water – too much water can weaken the glue’s bonding strength. Another unique aspect of Citadel glue is its precision applicator. The fine tip allows for pinpoint application, which is essential when working with small parts or delicate models. This feature enables users to apply precise amounts of glue, preventing excess glue from oozing out and potentially ruining the model’s appearance.

Tips and Tricks for Faster and More Effective Drying Times

While you can use this cement the ‘traditional’ way, putting some on one piece, joining the two together and holding until set, there’s a much better way to do things. However, it’s crucial to remember that handling your project too soon after applying the glue can compromise its integrity. Wait for at least a few minutes before touching or moving the glued material to ensure that it’s fully cured. Keep in mind that some glues have a longer drying time than others, and it’s important to allow enough time for the glue to dry completely before handling the miniature. Practice: Lastly, practice makes perfect. The more you glue Warhammer figures, the more comfortable and confident you’ll become, and the steadier your hand will be.

If the cap is still hard to open, repeat the process for a few more minutes until the glue fully melts. In cold conditions, the best way to dry Citadel glue is to warm up the area around the glue. You can use a warm towel or heat lamp to increase the ambient temperature, helping your glue to dry faster. Additionally, placing your project in a warmer room or near a heat source can also help. It’s important to be careful not to get the glue too hot, as this can damage your project. Use a magnifying glass: It can be difficult to see all the small details on Warhammer figures without a magnifying glass. Using one can help you see exactly where the glue needs to go and help you keep a steady hand.To prevent damage to the applicator, it is recommended to use the right tools and technique for opening the glue container. The methods mentioned in the article can be used effectively to open the container without causing damage to the applicator. Yes, excess glue can be removed with a cotton swab or Q-tip dipped in rubbing alcohol. Be sure to use a light touch and not to rub too hard to avoid damaging the figure. References So, these are the steps you can follow to use Citadel plastic glue. Repeat the process as you need and get the proper benefit of this bond. Make sure you scrape off the excess and let it completely dry every time. Last Opinion