Anglosol Cement 1200 is a ready-mixed, colourless, solvent based cement. It consists of acrylic polymer and methyl methacrylate monomer dissolved in solvents. Laminating 'Perspex' sheets - as the absorption of the solvent is likely to cause distortions and / or stress crazing

EVO-PLAS TENSOL 12 is not recommended for laminating 'Perspex' sheets, as the absorption of the solvent is likely cause distortions and/or stress crazing. Tensol 12 is designed for the bonding of cast acrylic sheet intended for interior use only. Extruded acrylic applying the adhesive and assembling the parts. Dispense the adhesive from a small polythene bottle To obtain maximum strength more rapidly, simply leave the joint to harden at room temperature for at least 24 hours then heat for 8 hours at: 80�C. Storage informationEVO-PLAS TENSOL 12 has been specially developed to reduce the problems of rapid drying and 'skinning' common with solvent based cements. It is a versatile product for general fabrication work that does not need high bond strength. Grabs in seconds, cures in one hour FUSION Product Details Fusion 500 – Thixotropic Acrylic Adhesive Along with being ideal for general fabrication work, Tensol 12 is also ideal for: the manufacture of internal signs from cast acrylic sheet and is suitable for joining items made from: 'Diakon' acrylic polymers, as well as 'Perspex'.

ANGLOSOL CEMENT 1200 should not be used for outdoor applications and cannot be used with Perspex ME, Perspex SW or Perspex AG grades.Nor is it recommended for laminating cast acrylic (Perspex) sheets as crazing will eventually occur. assembly. After 4 hours cure the parts can be lightly machined but, for the best results, the joint should be Anglosol Cement 1200 is suitable for joining items made from ‘Diakon’ acrylic polymers as well as cast acrylic (Perspex). Before using Tensol 12 store the adhesive at 5 to 10oC for 12 hours to reduce solvent evaporation between ANGLOSOL CEMENT 1200 is a ready-mixed, colourless, solvent based cement.It consists of acrylic polymer and methyl methacrylate monomer dissolved in solvents.

Please note:

dissolved in solvent for the bonding of acrylic sheet for interior use only. Tensol 12 hardens as the solvent This solvent cement is versatile and ideal for: general fabrication work, that does not need a high bond strength. Tensol 70 is designed for bonding cast acrylic sheet. It will also bond extruded acrylic sheet, but will cause I had some laser cut boxes that I needed to 'glue' together so I researched the best materials to use on acrylic. Tensol 12 is not something I knew about but it was recommended as a good way of welding the acrylic together.

only be done at least one hour after the adhesive has set. Non-thermoformed components can be heated of the Part A. The Part A is a viscous mixture of acrylic polymer dissolved in monomer. The Part B is a

RETURNS

Joints will be hardened after about 3 hours at room temperature; but, should not be machined for at least 24 hours. The bonds will reach their maximum strength after approx. 3 weeks at room temperature; however, for most applications 1 - 2 weeks should be adequate. Tensol 12 will last for at least 12 months from date of manufacture - when stored under the above conditions. Preparation advice